ABN Chain Breaker 13-Piece Set Chain Cutter and Riveter for Motorcycle Bike ATVCategory: 100 Chain BreakerPractical: Use the ABN Chain Breaker 13-Piece Set with Carrying Case – Chain Cutter and Riveter for Motorcycle, Bike, ATV to remove and reinstall motorcycle/bike, rear drive, and OHV cam chains that are #35 to #630; Tool completely pushes out the chain link pinEasy to Use: Instructions – Loosen the sprocket nut, unscrew the bottom bolt on the chain press tool, and place the spring on the pin inside the tool. Then, replace the tightening bolt and remove the top bolt. Screw on the handle and lever, place the tool over your chain, and tighten the tool on the chain pin (this forces the chain and pin out the other side)Durable: Constructed from hardened steel to ensure strength and longevityEasy Storage: 4.8” x 3” x 8.5” (12.2cm x 7.6cm x 21.6cm) heavy-duty blow-molded plastic carrying case for easy transportation, simple storage, and quick organizationContents: Package includes (1) chain press + (1) handle + (1) lever + (3) anvils, (3) pins – 2.2mm, 2.9mm, 3.8mm + (1) riveter + (1) spring + (2) press plates + (1) carrying caseRemove and reinstall motorcycle/bike, rear drive, and OHV cam chains with that ABN Chain Breaker 13-Piece Set with Carrying Case – Chain Cutter and Riveter for Motorcycle, Bike, ATV. This tool does the hard work for you and completely pushes out the chain link pin. It will break chains up to size #630, press master link plates on chains up to #530, and rivet hollow nosed master link pins on chains up to #630. As with any threaded drive tool, use lithium grease on the threads before assembling and using for smooth operation and tension recognition. We recommend not grinding off the pin chain unless your chain is #530 or thicker. This package includes 1 chain press, 1 handle, 1 lever, 3 anvils, 3 pins – 2.2mm, 2.9mm, and 3.8mm, 1 riveter, 1 spring, 2 press plates, and 1 carrying case.