Exhaust Manifold Coating

POR-15 High Temperature Heat Resistant Paint

POR-15 High Temperature Heat Resistant PaintASIN: B00J6B1JZY /
  • Color: Gray
  • Brand: POR-15
  • ASIN: B00J6B1JZY
  • UPC: 051491442169
  • Part No: 44216

    Eastwood Factory Gray High Temp Durability Coating 1 Pint 1400 F

    Eastwood Factory Gray High Temp Durability Coating 1 Pint 1400 FASIN: B00K0922B6 /
  • Color: Clear
  • Brand: Eastwood
  • ASIN: B00K0922B6
  • UPC: 607174101481
  • Part No: 34105Z

    POR-15 44218 Gray High Temperature Paint Manifold - 15 fl. oz. by POR-15

    POR-15 44218 Gray High Temperature Paint Manifold - 15 fl. oz. by POR-15ASIN: B01LTGLAG6 /
  • Brand: POR-15
  • ASIN: B01LTGLAG6
  • Part No: 898688

    Dorman 674-909 Drivers Side Exhaust Manifold Kit For Select Chrysler / Dodge / Mitsubishi Models

    Dorman 674-909 Drivers Side Exhaust Manifold Kit For Select Chrysler / Dodge / Mitsubishi ModelsASIN: B00FLFVXPK /
  • Color: Ready To Paint If Needed
  • Brand: Dorman
  • ASIN: B00FLFVXPK
  • UPC: 019495389477
  • Part No: 674-909

    DIESEL POWER SOURCE 3-PIECE T-3 MANIFOLD 12 VALVE for 1994-1998 DODGE CUMMINS

    DIESEL POWER SOURCE 3-PIECE T-3 MANIFOLD 12 VALVE for 1994-1998 DODGE CUMMINSASIN: B00RZLTCAG /
  • Brand: Diesel Power Source
  • ASIN: B00RZLTCAG
  • UPC: 752830315655
  • Part No: DPS12V-R

    Thermo-Tec 12003 Copper High Heat Wrap Coating

    Thermo-Tec 12003 Copper High Heat Wrap CoatingASIN: B000TXW3N0 /
  • Color: Copper
  • Brand: Thermo-Tec
  • ASIN: B000TXW3N0
  • UPC: 755829120032
  • Part No: 12003

    POR-15 44318 Aluminum High Temperature Paint - 15. oz by POR-15

    POR-15 44318 Aluminum High Temperature Paint - 15. oz by POR-15ASIN: B01LVTKHMR /
  • Brand: POR-15
  • ASIN: B01LVTKHMR
  • Part No: 69212

    POR-15 44118 Black High Temperature Paint Flat, 15 fl.oz

    POR-15 44118 Black High Temperature Paint Flat, 15 fl.ozASIN: B01LTG1EJE /
  • Color: Black
  • Brand: POR-15
  • ASIN: B01LTG1EJE
  • Part No: 1

    VHT SP102 FlameProof Coating Flat Black Paint Can - 11 oz.

    VHT SP102 FlameProof Coating Flat Black Paint Can - 11 oz.ASIN: B000CPJLGM /
  • Color: Flat Black
  • Brand: VHT
  • ASIN: B000CPJLGM
  • UPC: 010155001029
  • Part No: SP102

    PlastiKote HP-17 Cast Gray Hi-Temp Paint - 11 Oz.

    PlastiKote HP-17 Cast Gray Hi-Temp Paint - 11 Oz.ASIN: B000CPAA2Q /
  • Color: grey
  • Brand: PlastiKote
  • ASIN: B000CPAA2Q
  • UPC: 071915220685
  • Part No: HP17

    Nissan Altima 2.5L 2007-2013 Catalytic Converter Exhaust Manifold 4-Cylinder High Flow Cats 674-933 (OE Replace:14002-JA91E)

    Nissan Altima 2.5L 2007-2013 Catalytic Converter Exhaust Manifold 4-Cylinder High Flow Cats 674-933 (OE Replace:14002-JA91E)Category: Exhaust Manifold CoatingFeatures:Tube material: Aluminized SteelExchange part number:674-933OE Parts Numbers: 140E2-ZX31E 140E2-JA02E 140E2ZX31E 140E2JA02EEPA OBD-II Approved.Manufactured From High Quality & Durable Stainless Steel Catalytic Case For Long Lasting Durability & For Better Protection.5 years or 50,000 miles limited warranty.Fit for :2013 Nissan Altima L4 2.5L (2500cc)2012 Nissan Altima L4 2.5L (2500cc)2011 Nissan Altima L4 2.5L (2500cc)2010 Nissan Altima L4 2.5L (2500cc)2009 Nissan Altima L4 2.5L (2500cc)2008 Nissan Altima L4 2.5L (2500cc)2007 Nissan Altima L4 2.5L (2500cc)Package Included:1x Catalytic Converter Assembly (Includes installation kit in the photo)CAUTION:This item is not certified for sale in California.If your vehicle is registered in California, DO NOT BUY This item.If your vehicle MEETS California REQUIREMENT, BUT NOT REGISTER In California This will work on your vehicle.

    Catalytic Converter Exhaust Manifold for 2001 2002 2003 2004 2005 Honda Civic 1.7L Front

    Catalytic Converter Exhaust Manifold for 2001 2002 2003 2004 2005 Honda Civic 1.7L FrontCategory: Exhaust Manifold CoatingSpecification:Fits models with 4 cylinder, 1.7 liter engines ONLYTube material: Aluminized SteelExchange part number: 18160-PLM-A00, 18160-PLM-A50OE Parts Numbers: 327-59214, 327-50120DETAILED APPLICATIONS:2005 Honda Civic DX Submodel2005 Honda Civic HX Submodel2005 Honda Civic LX Submodel2005 Honda Civic Value Package Submodel2004 Honda Civic DX Submodel2004 Honda Civic HX Submodel2004 Honda Civic LX Submodel2004 Honda Civic Value Package Submodel2003 Honda Civic DX Submodel2003 Honda Civic HX Submodel2003 Honda Civic LX Submodel2002 Honda Civic DX Submodel2002 Honda Civic HX Submodel2002 Honda Civic LX Submodel2001 Honda Civic DX Submodel2001 Honda Civic HX Submodel2001 Honda Civic LX SubmodelPackage Included: 1pcs Catalytic Converter Assembly with Free Required Gasket and BoltsEmissions Notes:Not legal for sale in California&New York City !!!If your vehicle is registered in California, do not purchase this part.If your vehicle meets California requirements, but is not registered in California, this converter will work on your vehicle.

    Front Catalytic Converter Exhaust Manifold for Chevy 99-07 GMC Yukon Silverado 1500 2500 Truck Manifold Converters with Heat Shield

    Front Catalytic Converter Exhaust Manifold for Chevy 99-07 GMC Yukon Silverado 1500 2500 Truck Manifold Converters with Heat ShieldCategory: Exhaust Manifold CoatingThis item is not certified for sale in California & New York. If your vehicle is registered in California or New York, DO NOT BUY This item. If your vehicle MEETS California or New York REQUIREMENT, BUT NOT REGISTER In California or New York, This will work on your vehicle.Specification:Oxygen Sensor Ports:4length?40.5 in. overall lengthLocation:FrontRecommended Use:OE ReplacementInlet Type:Dual (3-bolt spinner and 3-bolt welded flange)Outlet Type:Single (2-bolt welded flange)Superseded Part Number: 14002-9J305, 674-659, 208A28J110, 208A28J112EPA Certified;Non CARB compliant;Fitment:Chevrolet Silverado 1500 1997-2007/Chevrolet Silverado 1500 Classic 2007Chevrolet Silverado 2500 1997-2007/Chevrolet Avalanche 1500 2002-2005CHEVROLET TAHOE 2002-2006/Chevrolet Suburban 1500 2000-2006GMC Yukon 2002-2006/GMC Yukon XL 1500 2000-2006GMC Sierra 1500 1999-2005/GMC Sierra 1500 Classic 2007GMC Sierra 2500 1999 2000/Cadillac Escalade 2002-2005Package Included:1 Set Catalytic Converter, need to joint 2pcs togetherInstallation:Professional Installation Guide can be provided, you can contact our customer service to get the video if you need.

    Exhaust Manifold Front Catalytic Converter 2.5L For 2002-06 Nissan Altima Hdwre

    Exhaust Manifold Front Catalytic Converter 2.5L For 2002-06 Nissan Altima HdwreCategory: Exhaust Manifold CoatingFeatures:Tube material: Aluminized Steel;Exchange part number: 40810, 641169, 1195, NIS2527, NIS2534;OE Parts Numbers: 140028J008, 140029J360, 140029J305;EPA OBD-II Approved;Manufactured From High Quality & Durable Stainless Steel Catalytic Case For Long Lasting Durability & For Better Protection;Note: This catalytic converter has 2 oxygen sensor provisions. While it will fit and work correctly for models with one oxygen sensor, an additional plug will be needed for proper function.Fit for :2006 Nissan Altima L4 2.5L (2500cc) Combined Manifold And Converter Assembly2005 Nissan Altima L4 2.5L (2500cc) Combined Manifold And Converter Assembly2005 Nissan Sentra L4 2.5L (2500cc) Combined Manifold And Converter Assembly2004 Nissan Altima L4 2.5L (2500cc) Combined Manifold And Converter Assembly2004 Nissan Sentra L4 2.5L (2500cc) Combined Manifold And Converter Assembly2003 Nissan Altima L4 2.5L (2500cc) Combined Manifold And Converter Assembly2003 Nissan Sentra L4 2.5L (2500cc) Combined Manifold And Converter Assembly2002 Nissan Altima L4 2.5L (2500cc) Combined Manifold And Converter Assembly2002 Nissan Sentra L4 2.5L (2500cc) Combined Manifold And Converter AssemblyPackage Included:1x Catalytic Converter Assembly (Includes everything in the photos)CAUTION:This item is not certified for sale in California.If your vehicle is registered in California, DO NOT BUY This item.If your vehicle MEETS California REQUIREMENT, BUT NOT REGISTER In California This will work on your vehicle.

    Exhaust Manifold Front Catalytic Converter For Nissan SentraAltima 2002-2006 2.5L 674-659 EPA Certificated REPN960339

    Exhaust Manifold Front Catalytic Converter For Nissan SentraAltima 2002-2006 2.5L 674-659 EPA Certificated REPN960339Category: Exhaust Manifold CoatingSpecification:Tube material: Aluminized Steel;Exchange part number: 40810, 641169, 1195, NIS2527, NIS2534;OE Parts Numbers: 140028J008, 140029J360, 140029J305;EPA OBD-II Approved;Best Quality as OEM Style Replacement;Manufactured From High Quality & Durable Stainless Steel Catalytic Case For Long Lasting Durability & For Better Protection;Note: This catalytic converter has 2 oxygen sensor provisions. While it will fit and work correctly for models with one oxygen sensor, an additional plug will be needed for proper function.Fit for :2006 Nissan Altima L4 2.5L (2500cc) Combined Manifold And Converter Assembly2005 Nissan Altima L4 2.5L (2500cc) Combined Manifold And Converter Assembly2005 Nissan Sentra L4 2.5L (2500cc) Combined Manifold And Converter Assembly2004 Nissan Altima L4 2.5L (2500cc) Combined Manifold And Converter Assembly2004 Nissan Sentra L4 2.5L (2500cc) Combined Manifold And Converter Assembly2003 Nissan Altima L4 2.5L (2500cc) Combined Manifold And Converter Assembly2003 Nissan Sentra L4 2.5L (2500cc) Combined Manifold And Converter Assembly2002 Nissan Altima L4 2.5L (2500cc) Combined Manifold And Converter Assembly2002 Nissan Sentra L4 2.5L (2500cc) Combined Manifold And Converter AssemblyPackage Included:1x Catalytic Converter Assembly (Includes everything in the photos)CAUTION:This item is not certified for sale in California.If your vehicle is registered in California, DO NOT BUY This item.If your vehicle MEETS California REQUIREMENT, BUT NOT REGISTER In California This will work on your vehicle.

    Nissan Altima 2007-2013 2.5L Catalytic Converter Exhaust Manifold 4-Cylinder High Flow Cats 674-933 (OE Replace:14002-JA91E)

    Nissan Altima 2007-2013 2.5L Catalytic Converter Exhaust Manifold 4-Cylinder High Flow Cats 674-933 (OE Replace:14002-JA91E)Category: Exhaust Manifold CoatingFeatures:Tube material: Aluminized SteelExchange part number:674-933OE Parts Numbers: 140E2-ZX31E 140E2-JA02E 140E2ZX31E 140E2JA02EEPA OBD-II Approved.Manufactured From High Quality & Durable Stainless Steel Catalytic Case For Long Lasting Durability & For Better Protection.5 years or 50,000 miles limited warranty.Fit for :2013 Nissan Altima L4 2.5L (2500cc)2012 Nissan Altima L4 2.5L (2500cc)2011 Nissan Altima L4 2.5L (2500cc)2010 Nissan Altima L4 2.5L (2500cc)2009 Nissan Altima L4 2.5L (2500cc)2008 Nissan Altima L4 2.5L (2500cc)2007 Nissan Altima L4 2.5L (2500cc)Package Included:1x Catalytic Converter Assembly (Includes installation kit in the photo)CAUTION:This item is not certified for sale in California.If your vehicle is registered in California, DO NOT BUY This item.If your vehicle MEETS California REQUIREMENT, BUT NOT REGISTER In California This will work on your vehicle.

    Catalytic Converter For Honda Civic 1.7L EX/GX/HX Acura EL1.7L 2001-2005 Exhaust Manifold Front Pipe with Catalytic Converters

    Catalytic Converter For Honda Civic 1.7L EX/GX/HX Acura EL1.7L 2001-2005 Exhaust Manifold Front Pipe with Catalytic ConvertersCategory: Exhaust Manifold CoatingSpecifications:OE Replacement Number:18160-PLR-A00Interchange Part Number: 18181-PLD-000,18182-PLD-000,18176-P08-003,36532-PLR-A11 41 in. overall length ,Oxygen Sensor Ports: 2Inlet Type: Single (2-bolt welded flange); Outlet Type: Single (3-bolt welded flange)Emissions:48-State Legal (Cannot Ship to CA or NY) Tube material:Aluminized Steel Oxygen sensor ports:1 Heat Shield: Yes Substrate Material: Ceramic Condition:New Fitment:2001 2002 2003 2004 2005 Honda Civic EX Coupe 2-Door/EX Sedan 4-Door/GX Sedan 4-Door/HX Coupe 2-Door 1.7L 2002 2003 2004 2005 Honda Civic Si Coupe 2-Door/Si Sedan 4-Door 1.7L 2005 Honda Civic EX Special Edition Coupe 2-Door/EX Special Edition Sedan 4-Door 1.7L 2001-2005 Acura EL 1.7L         Features:100% Brand new never used or installed Made From High Quality T-409 Stainless Steel Light-Weight and Fast Air Flow Design 5 Years or 50,000 Miles Manufacturer Warranty Great emissions control device with stable performance, reliable quality and long service life Direct-Fit so no cutting or welding is required to ensure an easy and secure installationOBD II and top grade quality ensuring your check engine light stays off and your exhaust runs smoothWith EPA Approved.It can pass smog emission test in 48 states except CA&NYTool You’ll need:1.Car jack;Penetrating Lubricant such as WD-40;Socket wrench or ratchet set;Breaker bar;Screwdrivers;Hammer;Spare 2-inch bolts;Spare lock washers;2. New catalytic converter made for your vehicle.CAUTION:Due to the increased emissions standards.This item is not certified for sale in California and New York.*If your vehicle is registered in California or New York, DO NOT BUY This item.*If your vehicle MEETS California REQUIREMENT, BUT NOT REGISTER In California or New York. This will work on your vehicle.Package Includes:1 x Catalytic converterNotes:1.Please fix the problem that caused the original converter to fail before installing the new converter.2.We highly recommend having a certified mechanic do the installation. Any forced installation will void the warranty and the refund.

    SS Exhaust Header Manifold for 88-97 Chevy/GMC C/K Pickup Truck GMT400 5.0/5.7 89 90 91 92 93 94 95 96

    SS Exhaust Header Manifold for 88-97 Chevy/GMC C/K Pickup Truck GMT400 5.0/5.7 89 90 91 92 93 94 95 96Category: Exhaust Manifold CoatingSS Exhaust Header Manifold for 88-97 Chevy/GMC C/K Pickup Truck GMT400 5.0/5.7Our entire product line of exhaust manifold is designed to produce maximum street performance in stock or mildly modified engines. These headers are precision machined from durable 16-gauge 304 stainless steel, providing excellent resistance to corrosion, heat and the elements in any environment. They feature mandrel-bent primary tubing for increased flow to let your engine really breathe. Unleash your vehicle's full potential, feel the increase in power when you stomp on the gas and get pushed back against the seat, hear the exhaust note’s rumble and turns into a roar when you accelerate.Polished 304 stainless steel constructionMandrel-bent tubing for smooth exhaust flowLightweight & sturdy 16 gauge tubingTIG welded CNC machine flangesPremium gaskets and all hardware includedFitment Type: Performance/CustomPackage Include: Necessary bolts/studs & gasketsPlacement on Vehicle: Front

    Pontiac Firebird/GTO/LeMans 326-455 V8 Stainless Steel Long Tube 4-1 Header Exhaust Manifold

    Pontiac Firebird/GTO/LeMans 326-455 V8 Stainless Steel Long Tube 4-1 Header Exhaust ManifoldCategory: Exhaust Manifold CoatingThe exhaust manifolds found on the 1964-1979 Pontiac small block engines were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 Long Tube off-road racing headers are designed to allow the exhaust gasses to flow more freely from each cylinder and combine in a more efficient manner. Tubing has been optimized for the 5.7L(350ci), 6.6L(400ci) and 7.5L(455ci) engines. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Specification:Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability i.e. Maximizing Smoothest High Exhaust Air Flow RateTIG Welded CNC Machine FlangeOffers the Best Flow Characteristics for the Engine at High Engine SpeedsIncrease High Flow Air, Instantly Gain 10 -15 Hp. / Tq.Inlet: 1 7/8" OD / Outlet: 3" OD / Collector Outlet: 2.5" OD / 16 Gauge Wall Piping / 10mm Thick Header FlangePackage Included:1 x Set of Exhaust HeadersFitment:64-70 Pontiac Tempest64-77 Pontiac LeMans64-73 Pontiac GTO67-79 Pontiac Firebird70-74 Pontiac Grand Prix73-75 Pontiac Grand Am75-77 Pontiac Grand LeMansFits Round Port Engines OnlyDoes not fit D-Port Models

    For 1964 to 1977 Mustange / Fairlane / Cougar V8 Stainless Steel Long Tube Header / Exhaust Tubular Manifold

    For 1964 to 1977 Mustange / Fairlane / Cougar V8 Stainless Steel Long Tube Header / Exhaust Tubular ManifoldCategory: Exhaust Manifold CoatingThe exhaust manifolds found in the 1968-1977 Small Block Ford were designed to combine the exhaust gasses from each of the cylinders quickly with a manifold that was cost effective to produce. Our 4-1 Long Tube off-road headers are designed to allow the exhaust gasses to flow more freely from each 4 cylinder bank and combine in a more efficient manner. Tubing has been optimized for the 4.7L(289ci) and 5.0L(302ci) engines. This creates a reduction in cylinder backpressure and improved exhaust gas velocity. These improvements free up lost horsepower and torque. An added benefit is a more performance oriented exhaust sound.Specification:Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability i.e. Maximizing Smoothest High Exhaust Air Flow Rate2 x 4-1 High Performance Racing Spec. Design, Produces the Most Top End PowerOffers the Best Flow Characteristics for the Engine at High Engine SpeedsIncrease High Flow Air, Instantly Gain 10 -15 Hp. / Tq.Inlet/Outlet: 1-5/8"(OD) / 3"(OD) / 10mm Thick Header Flange / 3" to 2.5" Exhaust Collectors IncludedPackage Included:1 x Set of Exhaust HeadersNotes:Requires modification or aftermarket Y-pipe not includedFitment:66-70 Ford Fairlane62-70 Ford Falcon71-77 Ford Maverick64-77 Ford Mustang67-70 Mercury CougarFits Models with 4.3L 260Cu. In./ 4.7L 289Cu. In./ 5.0L 302Cu. In. V8 Engine ONLY

    Stainless Steel Exhaust Header Manifold for 94-04 S10/Sonoma Pickup 2.2 134 4Cyl 95 96 97 98 99 00 01 02 03

    Stainless Steel Exhaust Header Manifold for 94-04 S10/Sonoma Pickup 2.2 134 4Cyl 95 96 97 98 99 00 01 02 03Category: Exhaust Manifold CoatingStainless Steel Exhaust Header Manifold for 94-04 S10/Sonoma Pickup 2.2 134 4CylOur entire product line of exhaust manifold is designed to produce maximum street performance in stock or mildly modified engines. These headers are precision machined from durable 16-gauge 304 stainless steel, providing excellent resistance to corrosion, heat and the elements in any environment. They feature mandrel-bent primary tubing for increased flow to let your engine really breathe. Unleash your vehicle's full potential, feel the increase in power when you stomp on the gas and get pushed back against the seat, hear the exhaust note’s rumble and turns into a roar when you accelerate.Polished 304 stainless steel constructionMandrel-bent tubing for smooth exhaust flowLightweight & sturdy 16 gauge tubingTIG welded CNC machine flangesPremium gaskets and all hardware included

    For 1969 to 1979 Ford F100 5.0L V8 Engine 302 RWD Pair Stainless Steel Full Length Long Tube Exhaust Manifold Header 70 71 72 73 74 75 76 77 78

    For 1969 to 1979 Ford F100 5.0L V8 Engine 302 RWD Pair Stainless Steel Full Length Long Tube Exhaust Manifold Header 70 71 72 73 74 75 76 77 78Category: Exhaust Manifold CoatingGetting more air into your engine and more exhaust out is the key to a performance motor. That's where exhaust headers is significant as the first revenue of an exhaust system. Exhaust performance headers manipulate the air flow with the performance-robbing exhaust manifold that came with your car. Headers provide each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders; thus, the backpressure that occurs in common exhaust manifolds. When cylinders don't have to fight with each other to expel their exhaust, they can put more power through the wheels, pushing the vehicle. Combining with a high performance cold air intake, and a cat-back exhaust system, a header system removes all restrictions of your engine, then, it is able to perform at its full potential.Specification:Made of High Quality T-304 Stainless Steel Material2 X 4-1 Racing Design, 1-1/2" OD Primaries3" OD Collector, 3-Bolt 5/16" Thick FlangesFull Length Headers for Higher HorsepowerIncrease high flow air, instantly gain 10 to 15 Hp. / Tq.Package Included:1 X Pair of Exhaust Manifold Headers (Left & Right)Notes:100% Brand NewProfessional Installation is Highly RecommendedInstallation Instruction is NOT IncludedFitment:69-79 Ford F-100 5.0 V8Fits RWD Models Only

    DEI 010301 HIGH TEMPERATURE EXHAUST HEADER HEAT COATING SILICONE SPRAY CAN BLACK

    DEI 010301 HIGH TEMPERATURE EXHAUST HEADER HEAT COATING SILICONE SPRAY CAN BLACKCategory: Exhaust Manifold Coating
  • Category: Exhaust Manifolds & Headers
  • Price: 15 USD
  • FOR CIVIC D15/D16 SOHC BLACK COATED EXHAUST MANIFOLD 4-2-1 HEADER+02 BUNG/GASKET

    FOR CIVIC D15/D16 SOHC BLACK COATED EXHAUST MANIFOLD 4-2-1 HEADER+02 BUNG/GASKETCategory: Exhaust Manifold Coating
  • Category: Exhaust Manifolds & Headers
  • Price: 47 USD
  • Performance Black Coated Exhaust Header Manifold 62-80 MG MGB 1.8L 4-Cylinder

    Performance Black Coated Exhaust Header Manifold 62-80 MG MGB 1.8L 4-CylinderCategory: Exhaust Manifold Coating
  • Category: Exhaust Manifolds & Headers
  • Price: 139 USD
  • FOR 94-97 ACCORD 2.2 STAINLESS BLACK COATED EXHAUST RACING MANIFOLD 4-2-1 HEADER

    FOR 94-97 ACCORD 2.2 STAINLESS BLACK COATED EXHAUST RACING MANIFOLD 4-2-1 HEADERCategory: Exhaust Manifold Coating
  • Category: Exhaust Manifolds & Headers
  • Price: 64 USD
  • Performance Black Coated Exhaust Header Manifold Kit 10-11 Chevy Camaro 3.6L V6

    Performance Black Coated Exhaust Header Manifold Kit 10-11 Chevy Camaro 3.6L V6Category: Exhaust Manifold Coating
  • Category: Exhaust Manifolds & Headers
  • Price: 170 USD
  • Long Tube Exhaust Manifold Header System + H-Pipe Kit 05-10 Ford Mustang GT 4.6L

    Long Tube Exhaust Manifold Header System + H-Pipe Kit 05-10 Ford Mustang GT 4.6LCategory: Exhaust Manifold Coating
  • Category: Exhaust Manifolds & Headers
  • Price: 249 USD
  • Performance Black Coated Exhaust Header Manifold 87-90 Jeep Wrangler 4.2L 6-Cyl

    Performance Black Coated Exhaust Header Manifold 87-90 Jeep Wrangler 4.2L 6-CylCategory: Exhaust Manifold Coating
  • Category: Exhaust Manifolds & Headers
  • Price: 160 USD
  • EXHAUST HEADER MANIFOLD DOWNPIPE ALUMINUM-COAT RACING HEAT WRAP 2"X 1/16" X 50

    EXHAUST HEADER MANIFOLD DOWNPIPE ALUMINUM-COAT RACING HEAT WRAP 2"X 1/16" X 50'Category: Exhaust Manifold Coating
  • Category: Exhaust Manifolds & Headers
  • Price: 15 USD
  • Exhaust Header Manifold For 86-89 Nissan/Datsun D21 Hardbody 2.4L/Z24 2WD Only

    Exhaust Header Manifold For 86-89 Nissan/Datsun D21 Hardbody 2.4L/Z24 2WD OnlyCategory: Exhaust Manifold Coating
  • Category: Exhaust Manifolds & Headers
  • Price: 144 USD
  • High Performance Black Exhaust Header Manifold System 74-80 Ford Pinto 2.3L 4Cyl

    High Performance Black Exhaust Header Manifold System 74-80 Ford Pinto 2.3L 4CylCategory: Exhaust Manifold Coating
  • Category: Exhaust Manifolds & Headers
  • Price: 62 USD
  • 3-2 COATED STAINLESS RACING HEADER EXHAUST MANIFOLD FOR 01-05 LEXUS IS300 JCE10

    3-2 COATED STAINLESS RACING HEADER EXHAUST MANIFOLD FOR 01-05 LEXUS IS300 JCE10Category: Exhaust Manifold Coating
  • Category: Exhaust Manifolds & Headers
  • Price: 81 USD
  • Small Block Chevy Ram Horn Ceramic Coated Exhaust Manifolds Headers SBC V8 350

    Small Block Chevy Ram Horn Ceramic Coated Exhaust Manifolds Headers SBC V8 350Category: Exhaust Manifold Coating
  • Category: Exhaust Manifolds & Headers
  • Price: 218 USD
  • #1 TOP Exhaust Manifold Coating Results

    Shop for similar similar searches of you customers: Awesome Beanie, Sheer Batiste Window Curtain, Compartment Platter, Clear Full Sheet Labels


    Exhaust Manifold Coating with Eastwood High Temp Coating

    Exhaust Manifold Coating

    Removing and coating exhaust manifolds with Eastwood High Temp Coating. These manifolds are out of a 1962 Studebaker Hawk GT.

    Tags: eastwood,exhaust,coating,high,temp,temperature,...

    Exhaust Manifold Graphite Coating

    Exhaust Manifold Coating

    Rusty cast iron exhaust manifolds or even master cylinders can be a distraction in a neatly detailed engine compartment. Paint and many high-heat coatings often don’t last in this environment and when they start to chip, peel and burn they often look even worse. Mark Simpson demonstrates how to freshen up the look of the cast iron parts with an exhaust manifold coating, dry graphite spray, that looks good and is easy to touch up. For more of our classic car restoration videos visit: http://...

    Tags: Classic Car,Classic Car Restoration,Classic Car...